P215PR-9200 Johnson Controls Direct-mount single phase controller
These direct mount pressure actuated condenser fan speed controllers are designed for speed variation of single-phase
motors. A pressure actuated device, gives the most direct and fastest response to pressure variations in the refrigerant system. The controller varies the supply voltage to the motor from 30% to at least 95% over the proportional band using the phase cutting principle. This provides speed variation of permanent split capacitor or shaded pole motors that do not draw more than 4 A (rms) full load current. The controllers can be used in non-corrosive refrigerant systems.
Features
• Condenser pressure control by fan speed variation
• Pressure input
• Direct mount
• Setpoint screw on top
• Built-in suppression filter
• IP65
• Compact design
• Attractive styling
• Quick connector plug included
• CE
• Tested for safe operation with all A2L and A3 refrigerants
P215PR
| Codes | Range (bar) | Element style | Setpoint (bar) | Prop. band (bar) | Supply voltage 50/60 Hz | Rating | Controller mode | Extra features |
| P215PR−9200 | 10 to 25 | 47 | 19 | 4.5 | 230 VAC | 4 Amp | Cut-off | — |
| P215PR−9202 | 22 to 42 | 47 | 26 | 5.5 | 230 VAC | 4 Amp | Cut-off | — |
| P215PR−9203 | 5 to 15 | 47 | 9 | 2.5 | 230 VAC | 4 Amp | Cut-off | — |
| P215PR−9800 | 10 to 25 | 28 | 19 | 4.5 | 230 VAC | 4 Amp | Cut-off | — |
| P215PR−9230 | 10 to 25 | 47 | 19 | 4.5 | 230 VAC | 4 Amp | Cut-off | Bulk Pack |
| P215PR−9232 | 22 to 42 | 47 | 26 | 5.5 | 230 VAC | 4 Amp | Cut-off | Bulk Pack |
| P215PR−9250 | 10 to 25 | 47 | 19 | 4.5 | 230 VAC | 4 Amp | Cut-off | Bulk Pack, 2 m cable connector incl |
Catalog PDF: P215PR_Catalog_Johnson Controls_EN_US